Scope Mounts

A/T Optic Riser 525-11 is approximately 4-1/2" long and is intended to be used with an optic backed up by a magnifier or NVG or thermal depending on the number of recoil slots the mount takes up. This riser has 11 recoil slots (12 lugs). Optimized for...

A/T Optic Riser 525-13 is approximately 5-3/4" long and covers the entire length of an upper receiver and offers one more recoil slot than the upper. This riser has 13 recoil slots (14 lugs). It can be used with any combination of sights, NVG, or thermal...

Base screws are 6-48 X 1/4" long. Ring screws are 6-40 X 5/8" long. Both screws use 7/64 Allen wrench. Height of mounts from top of receiver to centerline of scope tube is medium 1.06". Mount fits right hand firearms. Long action - Outside to outside of...

Engineered for precision and built to last, the MK2 series elevates your shooting experience with unmatched reliability and style. These MK2 Scope Mounts are designed for shooters seeking a robust and refined scope mounting solution. Featuring a...

The Rear ScopeCap is a simple, rugged, and low-profile solution to protect your scopes rear lens. Its signature flipper tab is integral to the ScopeCap and allows for fast, easy removal from your scopes bezel. When doffed, it has a lower profile than...

The Rear ScopeCap is a simple, rugged, and low-profile solution to protect your scopes rear lens. Its signature flipper tab is integral to the ScopeCap and allows for fast, easy removal from your scopes bezel. When doffed, it has a lower profile than...

The Rear ScopeCap is a simple, rugged, and low-profile solution to protect your scopes rear lens. Its signature flipper tab is integral to the ScopeCap and allows for fast, easy removal from your scopes bezel. When doffed, it has a lower profile than...

Engineered for precision and built to last, the MK2 series elevates your shooting experience with unmatched reliability and style. These MK2 Scope Mounts are designed for shooters seeking a robust and refined scope mounting solution. Featuring a...

Calculated Kinetics Smith and Wesson M&P 2.0 to Aimpoint ACRO P2 DOGTAG Optic Plate has a built in deflection table and is duty rated to withstand the abuse required by any application. The DOGTAG on this specific setup is providing a 70% reduction in...

Lerna mount is designed for end-users and provides a 2.91-inch optic centerline for quicker target identification, even with gear or equipment obstructions such as ear protection, communication headsets, gas masks/CBRN, and night vision systems. A higher...

**Calculated Kinetics Smith and Wesson M&P 2.0 to Holosun K Footprint and RMSc Footprint Optic (EPS, EPS Carry, 407k, 507k and any RMSc Footprint) DOGTAG Optic Plate has a built in deflection table and is duty rated to withstand the abuse required by any...

Calculated Kinetics Smith and Wesson M&P 2.0 to any RMR Footprint optic (Trijicon RMR, Holosun 407c, 507c, 507 Comp, Swampfox. Will not work for the SRO or other forward facing optics) DOGTAG Optic Plate has a built in deflection table and is duty rated...